Before & After Photos

This sealing and insulating priority are more important in the attic than anywhere else in the house. The SuperAttic system from Dr. Energy Saver overcomes the limitations of other attic energy upgrades, offering superior energy performance throughout the year as well as a neater, cleaner appearance and more usable attic space.

This homeowner in Southampton, MA called us due to very cold floors she had every winter. Our Home Comfort Specialist came out to her home, and she noticed that this homeowner's fiberglass insulation was falling off of the subfloor, rendering it useless.

We were able to help this homeowner. We removed the moldy fiberglass insulation. Then, we insulated the rim joist of the home. After that, we insulated along the bottom of the floor joist with SilverGlo™ foam insulation board. This means the homeowner will have warmer floors, lower energy bills, and more comfortable rooms! 

This homeowner had an energy audit done and the company doing the audit refused to go further upon discovery of a rather invasive mold situation. The homeowner was desperate to get to the root of the problem and get it remedied immediately. The homeowner came across our ad in a local publication and gave us a call.

The solution to fixing the problems in this home was quite a process. This home has 3 crawlspace areas that all needed to be extensively treated with MoldX2™ Cleaner and Botanical to get rid of existing mold and help to prevent future mold from growing. Each Crawlspace needed to have our Crawlspace Encapsulation System installed with Drainage Matting, TerraBlock™ Floor Insulation and SilverGlo™ Insulation on the walls. In addition, we used ZypFoam™ Closed-Cell Spray Foam Insulation around the Rim Joists in the basement and crawlspaces to properly air seal and help keep moisture out. We Installed a SmartPump™ and SmartPipe™ System in the crawlspace under the living room to eliminate water. We also installed a SaniDry™ High Performance Basement Dehumidification System in Main basement area. After removing old and replacing attic insulation with TruSoft™ Cellulose , TiteShell™ Can Light Covers and air sealing in attic, this job is a Wrap!

We received a call from a homeowner in Feeding Hills, MA who was concerned about attic leaks, inefficient fiberglass insulation and a leaky vent. We sent our building science specialist out to evaluate the home.

Our solution included a transformation that included sealing the attic with blown cellulose insulation and lining SilverGlo foam board against the ceiling walls. We created a barrier in the center for extra storage space too.

Thanks to Dr. Energy Saver by ECO Energy Solutions, LLC, the homeowner was very happy with the work and now lives comfortably in the home.

This home owner in Feeding Hills, MA called us to his home to see if we could help reduce the amount of water that was coming into his basement. When our building science specialist was on his inspection of the basement, he noticed that all the water was coming in from the bilco door to the outside. To make things worse, he did not have a steel insulated door to protect his home!

So, to fix this issue we first caulked the bilco door so no water could get in from that way, Then we installed our steel insulated basement door. Once we complete this door project the water will not be able to come into the basement and effect the home.

Now that Dr Energy Saver by Eco Energy Solutions has came and completed this project, this home owner will not have to worry about water in his basement any more!