Before & After Photos

This homeowner in Coventry, CT called us because of her concern over her crawl space. She was concerned due to the possibility of rodents and mold that were in her dirt crawl space. This is something we see often. Millions of homes were built with vented dirt crawl spaces. Now all building scientists agree - that was a big mistake. Now building codes are changing. In the winter, vents let cold air directly into our home. Floor insulation sags away from the sub floor and the cold air gets above it - rendering the insulation useless. In the summer the vents let warm humid air in which is cooled by the subterranean crawl space. This caused the relative humidity to go way up and condensation to form all over the crawl space surfaces including floor joists and ducts. Mold grows and wood rots, while insect and other pests flourish. Musty odors can be noticed upstairs as mold spores travel upwards into the living space. Eventually rotted floor joist must be replaced and mold must be remediated. An unending stream of water vapor comes up from the ground adding to the moisture load in the crawl space and house. The damp air is harder to heat and cool. Result - condensation, mold, rot, pests and odors, cold floors, drafts, uncomfortable home, higher fuel and electric bills.

Fogarty's Home Services helped this homeowner by encapsulating her crawlspace. The vents and other air leaks to the outside were sealed, often using our insulated vent covers. Walls were insulated with SilverGlo™ insulation with a reflective radiant barrier face. SilverGlo™ foam has graphite infused into the foam to increase the R-value by 24% over standard foam. A dimpled plastic drainage matting was installed across the floor to create an airspace and thermal break, and TerraBlock™ floor insulation was installed over it. Finally the heavy duty, 20 mil thick CleanSpace™ crawl space encapsulation liner was installed permanently across the dirt floor - sealed with mechanical fasteners to the walls and spiked to the floor. CleanSpace™ features Ultrafresh™ anti-microbial ingredients in the product. Results - much lower humidity, much warmer floors upstairs, less drafts, more comfortable house, lower fuel and electric bills.

Many homes have recessed lighting.  Can lights are a major source of air leakage from the conditioned space into the unconditioned attic space.  Most of these lights use incandescent or halogen bulbs which burn at 380 degrees.  Hot air rises faster so the air leaks faster.  We used our TiteShell can light covers which are safe to use around hot light fixtures.  Once the covers are fitted around the fixture they are air sealed with expanding foam. 

This homeowner in Salem, CT called us out to their home to insulate their basement due to having cold floors. This homeowner had no insulation in their basement at all. Poured concrete basement walls are a risk for potential mold in the summer when the hot humid air meets the cold concrete! This was negatively affecting their home creating cold floors, hard to heat, and higher heating and cooling bills to name a few.

We addressed this concern by insulating and air sealing the basement rim joist and walls. We first install our Foamax foam insulation boards along all the walls in the basement. They are secured with long fasteners. It has flame retardant properties. This results in warmer more comfortable, and helps with cold floors. Next, we spray our Spray Foam Insulation along the perimeter of the house covering the rim joist cavities and the sill plate. This stops all air leaks from outside entering the home through all cracks and gaps.

Thanks to Dr Energy Saver by Eco Energy solutions, this home is more comfortable, cheaper to heat and cool, and energy efficient!

This homeowner in Salem, CT called us out to their home for a Home Energy Evaluation. During our Attic walkthrough portion of the visit we noticed they had old, nasty fiberglass insulation and mold in their attic! Mold in your attic is not normal, and it is for sure not healthy. It means there is another problem in your home that is causing relative humidity in your home to go above 75% so mold can grow on wood and insulation. We can treat the home and prevent more mold from growing, but can we eliminate the mold that is already there? YES we can!

We use our Mold-X Neutralizer which kills all mold spores and stops the future growth. We spray this in the attic and make sure it reached all nooks and crannies where mold may grow. the mold is still visible, but it is dead. Next we use out Mold-X botanical to clean the mold stains off of any surface. 

In the photo you can see the black mold, and old insulation, in the after photo you can see old insulation is removed, and we have started out air sealing and insulation process as well.

Now, thanks to Dr. Energy Saver by Eco Energy Solutions this home is now safe environment!

Crawl space sump pump installation.