Before & After Photos

These homeowners met us at the Western Massachusetts Home and Garden Show where they let us know that they had a porch that they were looking to make into more livable space. With our free energy evaluation, we found that they only had a thin radiant barrier under the floor, which was not enough to keep out the cold on its own.

We removed the radiant barrier and insulated the rim joist with spray foam to create a proper seal before getting to the insulation. We then started installing our SilverGlo insulation foam board. SilverGlo is a graphite infused expended polystyrene board with a radiant barrier facing, it has 24% more insulation value than standard expanded polystyrene board. Those boards were put in place with special long screws and 3 inch washers and then any spaces between the boards were sealed with spray foam.

Thanks to Dr. Energy Saver by Eco Energy Solutions, these homeowners can enjoy this porch all year round!

This homeowner reached out to us saying that she had high energy bills and was cold in her home. As a result, she wanted to have her attic re-insulated. Luckily, we had the perfect solution for this customer. 

In this solution, we first have to remove the old fiberglass batt insulation, as well as the plywood in the attic. Once the attic was cleaned, we started on air sealing the attic with Zypfoam one part spray foam. This seals all cracks and crevices in the attic floor. We then used a long hose attached to a machine that blows our TruSoft™ cellulose insulation into the attic. TruSoft™ cellulose is able to fill all gaps and odd-shaped voids, as it is blown in insulation.

Now, this homeowner will have a much more comfortable home!

A customer in Middletown, CT called us in order to ensure that his attic was properly insulated. Our Home Comfort Specialist identified several places in this home that needed sealing and proper insulation. Our team used ZypFoam™ in order to properly seal the attic. We then used loosely blown TruSoft™ cellulose insulation on the attic floor and densely packed it into the exterior walls of the home. This ensures a more comfortable home. This customer will now have reduced energy loss year round! 

This homeowner was referred to us by an existing customer who recently had work done and knew we were perfect for the job. The homeowner had a terrible problem with mold in her attic and asked us to send someone out to help.

Our Building Science Specialist was able to easily identify the problem as being a poorly vented out bath fan leading to the attic. The air coming from the bathroom was mostly warm air, hitting the cold air in the attic and condensing into water and resulting in mold. We completely removed all existing, moldy fiberglass insulation and then cleaned and prepped the area for treatment with our MoldX2™ Cleaner and Botanical. We then built a deck and dam and blew in  new TruSoft™ Cellulose insulation. Next we ducted the bath fan out through the gable end and outside, preventing future mold issues. We completed the job by installing a David Lewis™ attic pull-down stair hatch cover to air seal and insulate the entrance to the attic.

The homeowner called Fogarty's Home Services concerned about the floors above the basement door being cold. We found that the existing door was old and drafty. We replaced the basement door with a steel-insulated basement door. Now the floors are warmer and the basement is more comfortable.