Before & After Photos

This heavy retaining wall in Downington PA was bowing and tipping over, and we knew that Basement Systems’ GeoLock Wall Anchors were the best solution for the problem.  

When the GeoLock system is installed, a hole is drilled into the bowing wall in predetermined intervals, depending on the number of anchors needed. One anchor plate is then attached to the interior and exterior sides of the wall, lining up with the predrilled hole, and one end of a 9-foot galvanized threaded rod is then inserted through the hole and anchor plates until the rod protrudes slightly out of the interior wall. An anchor bolt is then screwed onto that protruding end. The other end of the rod attaches to a heavy duty earth anchor, which gets embedded into firm, stable soil away from the foundation. Once everything is in place, the anchor bolt is tightened, and the reverse pressure pulls the wall back toward its original position. At this point, the wall is stabilized and secure and no further adjustment is necessary. However, gradual tightening of the anchor bolt will continue to adjust the wall and over time, may even straighten it completely. This home in Elkton needed 10 anchors to repair the wall, and we were able to straighten it completely in one day. The GeoLock wall anchors are guaranteed for a period of 25 years.

Just about every contractor who knows how to hang drywall, thinks they have the expertise to finish a basement. After all, how hard can it be, right? But basements pose certain challenges that aren’t a factor in the upper floors of your home, and the products and materials that work in your living room are not suitable for your basement. That’s why it is so important to hire an expert.

Basements are usually at least partially underground, so the walls and floors are colder and need to be insulated. There is more humidity in the basement, commonly due to moisture from the ground migrating through the concrete, or the heat of your dryer coming into contact with the cool walls, forming condensation. There is also the potential for flooding due to sump pump failure, leaks from your hot water heater, icemaker line or washing machine hose, a broken pipe, or the dreaded toilet overflow. 

Drywall and fiberglass insulation should never be used in basements. Even if you never have a flood, the high humidity will cause mold to grow on these organic materials and within a few years, your basement will start to smell like mold, and that’s just not healthy air to breathe. 

Basement Systems USA, Inc. never uses organic materials when finishing basements. On this job, you can see that we used a different type of wall board that is called Everlast Wall, which comes with a vinyl finish or unfinished and ready for paint.  Everlast Wall is 100% inorganic and comes with a 50-year warranty against water damage and will never have mold growth. We also used a beautiful, inorganic wood-look flooring that comes with a guarantee against water damage. 

The installation of a SaniDry XP dehumidifier guarantees that the basement will never feel damp. Most basements need a dehumidifier, especially if it is a finished basement where you and your family will be spending time. The standard store-bought dehumidifiers are not powerful enough to do the job. The SaniDry is 7-9 times more powerful than a regular dehumidifier, and not only does it dry the air, it’s 2-stage filter removes airborne allergens. 

Lastly, we added a Rockwell Egress window well, which allows for escape out of the basement in case of emergency. Building code requires that every finished basement has at least one egress window. Rockwells are a safety feature with a bonus! They allow lots of daylight to enter and brighten up your space.

So, if you hire a contractor to finish your basement, and you see him (or her!) dragging sheets of drywall and big rolls of pink insulation toward the entrance of your basement, wait until he makes the next trip to his truck to grab those boxes of laminated flooring that he plans to install, then lock your doors, turn out the lights and pretend you’re not home. And always remember - Mold LOVES organic materials, but it doesn’t stand a chance when it’s up against Basement Systems’ inorganic building products!!

We were contacted by the buyers of this property to assess the crawlspace. When they received their home inspection report, it was noted that the crawlspace had moisture and mold growth. This is not something anyone wants to deal with in their home, especially new homebuyers. 

Our solution for the mold and moisture in this crawlspace was to first treat the mold with our Mold X 2 Treatment, then we moved on to install SilverGlo insulation, new vent covers and then a SaniDry Sedona Dehumidifier. 

For this basement project we replaced all of the current basement windows and wells with our EverLast windows and Sunhouse enclosures and even turned one window in to an Egress. The 60 x 48 Egress window was paired with our Rockwell and Rockwell Cover. 

In Newark, DE, a homeowner had a basement that was only partially finished. With one enclosed room and a functional bathroom, the rest of the space remained open, bare, and underutilized. When Basement Systems USA came in, we set out to transform this basement from unfinished to polished, with a look that would make the whole space feel complete. The before and after contrast was striking – what was once an empty, incomplete area had become a warm, inviting space that could be used for a variety of purposes.

The homeowner couldn’t believe the transformation, and he was genuinely excited about the finished look. With his input and our expertise, we were able to create a basement that not only matched his original vision but exceeded his expectations. It’s a project that shows just how much potential an unfinished basement holds.